Email Us
[email protected]
Get A Quote

Aggregate Weighing In Asphalt Plant

  1. Home >>
  2. News
  3.  >> Aggregate Weighing In Asphalt Plant
  • Measuring moisture in asphalt production

    Measuring Moisture In Asphalt Production

    aggregate weight loaded into the mixer ... If a plant runs 300 tonnes of asphalt per hour at 6 moisture, it will be using 1,200 litres per hour of fuel to dry the aggregate before it is heated up to the correct temperature. If the moisture content then changed from 6 to 5 without the dryers being

  • How to Set Up a Portable Asphalt Plant AsphaltPro Magazine

    How To Set Up A Portable Asphalt Plant Asphaltpro Magazine

    Carlos Cardenas is a sales engineer for ADM Asphalt Drum Mixers Inc. with 25 years of expertise in the asphalt plant manufacturing industry. For more information, contact him at 260 637-5729. Share

  • Four tips for controlling asphalt mix designs in the lab

    Four Tips For Controlling Asphalt Mix Designs In The Lab

    Tip 1 Aggregate and gradation selection. Most of your challenges with asphalt mix designs in both the lab and the field can be minimized by having good control of the aggregates because remember, they are the largest component of your asphalt mix making up about 95 percent by weight. A typical mix design consists of both coarse and fine ...

  • Continuous mobile asphalt plant iNOVA 1200

    Continuous Mobile Asphalt Plant Inova 1200

    Continuous mobile asphalt plant EXTERNAL MIXER PUG MILL TYPE 4 Pug-Mill type bitumen injection is carried out in the mixer directly on the aggregate - out of the dryer, in a controlled environment - preserving the quality of the binding agent and ensuring homogeneity of the asphalt mass. Maximum mechanical energy applied on the mix.

  • Moisture In Asphalt Production AggNet

    Moisture In Asphalt Production Aggnet

    If a plant produces 300 tonnes of asphalt per hour at 6 moisture, it will be using 1,200 litres of fuel per hour to dry the aggregate before it is heated up to the correct temperature. If the moisture content then changed from 6 to 5 without the dryer being adjusted for 1h, that would equate to 180 litres of fuel being wasted in that 60min ...

  • Continuous mobile asphalt plant iNOVA 1200

    Continuous Mobile Asphalt Plant Inova 1200

    aggregates dosing HIGH PRECISION WHEN PRODUCING ASPHALT MIXTURES Four feeding bins with a 3.20m opening for feeding, being Two main ones of 10m each Two secondary ones of 5m each Individual dosing of aggregates through dynamic weighing in robust and high precision load cells, automatically variable speed gearmotor and self